CakeFest 2024: The Official CakePHP Conference

array_udiff

(PHP 5, PHP 7, PHP 8)

array_udiffВычисляет расхождение массивов, используя для сравнения callback-функцию

Описание

array_udiff(array $array, array ...$arrays, callable $value_compare_func): array

Вычисляет расхождение массивов, используя для сравнения данных callback-функцию. Поведение этой функции отличается от поведения функции array_diff(), которая сравнивает данные через внутреннюю функцию.

Список параметров

array

Первый массив.

arrays

Массивы для сравнения.

value_compare_func

Функция сравнения должна возвращать целое, которое меньше, равно или больше нуля, если первый аргумент является соответственно меньшим, равным или большим, чем второй.

callback(mixed $a, mixed $b): int
Предостережение

Возвращение нецелых значений из функции сравнения, таких как число с плавающей точкой (float), приведёт к внутреннему приведению возвращаемого значения callback-функции к целому числу (int). Таким образом, значения 0.99 и 0.1 будут приведены к целочисленному значению 0, что позволит сравнить эти значения как равные.

Предостережение

Callback-функция сортировки должна обрабатывать любое значение из любого массива в любом порядке, независимо от того, в каком порядке они были предоставлены вначале. Причина этого в том, что каждый отдельный массив сначала сортируется перед сравнением с другими массивами. Например:

<?php

$arrayA
= ["string", 1];
$arrayB = [["value" => 1]];
// $item1 and $item2 can be any of "string", 1 or ["value" => 1]
$compareFunc = static function ($item1, $item2) {
$value1 = is_string($item1) ? strlen($item1) : (is_array($item1) ? $item1["value"] : $item1);
$value2 = is_string($item2) ? strlen($item2) : (is_array($item2) ? $item2["value"] : $item2);
return
$value1 <=> $value2;
};

?>

Возвращаемые значения

Возвращает массив (array), содержащий элементы аргумента array, которых нет ни в одном другом аргументе.

Примеры

Пример #1 Пример использования функции array_udiff() с объектами класса stdClass

<?php

// Массивы для сравнения
$array1 = array(new stdClass, new stdClass,
new
stdClass, new stdClass,
);

$array2 = array(
new
stdClass, new stdClass,
);

// Проставление свойств для объектов
$array1[0]->width = 11; $array1[0]->height = 3;
$array1[1]->width = 7; $array1[1]->height = 1;
$array1[2]->width = 2; $array1[2]->height = 9;
$array1[3]->width = 5; $array1[3]->height = 7;

$array2[0]->width = 7; $array2[0]->height = 5;
$array2[1]->width = 9; $array2[1]->height = 2;

function
compare_by_area($a, $b) {
$areaA = $a->width * $a->height;
$areaB = $b->width * $b->height;

if (
$areaA < $areaB) {
return -
1;
} elseif (
$areaA > $areaB) {
return
1;
} else {
return
0;
}
}

print_r(array_udiff($array1, $array2, 'compare_by_area'));

?>

Результат выполнения приведённого примера:

Array
(
    [0] => stdClass Object
        (
            [width] => 11
            [height] => 3
        )

    [1] => stdClass Object
        (
            [width] => 7
            [height] => 1
        )

)

Пример #2 Пример использования функции array_udiff() с объектами класса DateTime

<?php

class MyCalendar {
public
$free = array();
public
$booked = array();

public function
__construct($week = 'now') {
$start = new DateTime($week);
$start->modify('Monday this week midnight');
$end = clone $start;
$end->modify('Friday this week midnight');
$interval = new DateInterval('P1D');
foreach (new
DatePeriod($start, $interval, $end) as $freeTime) {
$this->free[] = $freeTime;
}
}

public function
bookAppointment(DateTime $date, $note) {
$this->booked[] = array('date' => $date->modify('midnight'), 'note' => $note);
}

public function
checkAvailability() {
return
array_udiff($this->free, $this->booked, array($this, 'customCompare'));
}

public function
customCompare($free, $booked) {
if (
is_array($free)) $a = $free['date'];
else
$a = $free;
if (
is_array($booked)) $b = $booked['date'];
else
$b = $booked;
if (
$a == $b) {
return
0;
} elseif (
$a > $b) {
return
1;
} else {
return -
1;
}
}
}

// Создание календаря еженедельных встреч
$myCalendar = new MyCalendar;

// Запись еженедельных встреч
$myCalendar->bookAppointment(new DateTime('Monday this week'), "Уборка квартиры сотрудника Google.");
$myCalendar->bookAppointment(new DateTime('Wednesday this week'), "Катание на сноуборде.");
$myCalendar->bookAppointment(new DateTime('Friday this week'), "Борьба с багами в коде.");

// Проверка доступности дней путём сравнения дат в переменной $booked с датами переменной $free
echo "Я доступен в следующие дни на этой неделе...\n\n";
foreach (
$myCalendar->checkAvailability() as $free) {
echo
$free->format('l'), "\n";
}
echo
"\n\n";
echo
"Я занят в следующие дни на этой неделе...\n\n";
foreach (
$myCalendar->booked as $booked) {
echo
$booked['date']->format('l'), ": ", $booked['note'], "\n";
}

?>

Результат выполнения приведённого примера:

Я доступен в следующие дни на этой неделе...

Tuesday
Thursday


Я занят в следующие дни на этой неделе...

Monday: Уборка квартиры сотрудника Google.
Wednesday: Катание на сноуборде.
Friday: Борьба с багами в коде.

Примечания

Замечание: Обратите внимание, что функция обрабатывает только первый уровень многомерного массива. Значения на вложенных уровнях обрабатывают, например, так: array_udiff($array1[0], $array2[0], "data_compare_func");.

Смотрите также

  • array_diff() - Вычисляет расхождение массивов
  • array_diff_assoc() - Вычисляет расхождение массивов с дополнительной проверкой индекса
  • array_diff_uassoc() - Вычисляет расхождение массивов с дополнительной проверкой индекса через пользовательскую callback-функцию
  • array_udiff_assoc() - Вычисляет расхождение в массивах с дополнительной проверкой индексов, используя для сравнения значений callback-функцию
  • array_udiff_uassoc() - Вычисляет расхождение в массивах с дополнительной проверкой индексов, используя для сравнения значений и индексов callback-функцию
  • array_intersect() - Вычисляет пересечение массивов
  • array_intersect_assoc() - Вычисляет пересечение массивов с дополнительной проверкой индекса
  • array_uintersect() - Вычисляет пересечение массивов, используя для сравнения значений callback-функцию
  • array_uintersect_assoc() - Вычисляет пересечение массивов с дополнительной проверкой индексов, используя для сравнения значений callback-функцию
  • array_uintersect_uassoc() - Вычисляет пересечение массивов с дополнительной проверкой индекса, используя для сравнения индексов и значений отдельные callback-функции

add a note

User Contributed Notes 9 notes

up
52
Colin
17 years ago
I think the example given here using classes is convoluting things too much to demonstrate what this function does.

array_udiff() will walk through array_values($a) and array_values($b) and compare each value by using the passed in callback function.

To put it another way, array_udiff() compares $a[0] to $b[0], $b[1], $b[2], and $b[3] using the provided callback function. If the callback returns zero for any of the comparisons then $a[0] will not be in the returned array from array_udiff(). It then compares $a[1] to $b[0], $b[1], $b[2], and $b[3]. Then, finally, $a[2] to $b[0], $b[1], $b[2], and $b[3].

For example, compare_ids($a[0], $b[0]) === -5 while compare_ids($a[1], $b[1]) === 0. Therefore, $a[1] is not returned from array_udiff() since it is present in $b.

<?
$a = array(
array(
'id' => 10,
'name' => 'John',
'color' => 'red',
),
array(
'id' => 20,
'name' => 'Elise',
'color' => 'blue',
),
array(
'id' => 30,
'name' => 'Mark',
'color' => 'red',
),
);

$b = array(
array(
'id' => 15,
'name' => 'Nancy',
'color' => 'black',
),
array(
'id' => 20,
'name' => 'Elise',
'color' => 'blue',
),
array(
'id' => 30,
'name' => 'Mark',
'color' => 'red',
),
array(
'id' => 40,
'name' => 'John',
'color' => 'orange',
),
);

function compare_ids($a, $b)
{
return ($a['id'] - $b['id']);
}
function compare_names($a, $b)
{
return strcmp($a['name'], $b['name']);
}

$ret = array_udiff($a, $b, 'compare_ids');
var_dump($ret);

$ret = array_udiff($b, $a, 'compare_ids');
var_dump($ret);

$ret = array_udiff($a, $b, 'compare_names');
var_dump($ret);
?>

Which returns the following.

In the first return we see that $b has no entry in it with an id of 10.
<?
array(1) {
[0]=>
array(3) {
["id"]=>
int(10)
["name"]=>
string(4) "John"
["color"]=>
string(3) "red"
}
}
?>

In the second return we see that $a has no entry in it with an id of 15 or 40.
<?
array(2) {
[0]=>
array(3) {
["id"]=>
int(15)
["name"]=>
string(5) "Nancy"
["color"]=>
string(5) "black"
}
[3]=>
array(3) {
["id"]=>
int(40)
["name"]=>
string(4) "John"
["color"]=>
string(6) "orange"
}
}
?>

In third return we see that all names in $a are in $b (even though the entry in $b whose name is 'John' is different, the anonymous function is only comparing names).
<?
array(0) {
}
?>
up
32
napcoder
7 years ago
Note that the compare function is used also internally, to order the arrays and choose which element compare against in the next round.

If your compare function is not really comparing (ie. returns 0 if elements are equals, 1 otherwise), you will receive an unexpected result.
up
7
grantwparks at gmail dot com
16 years ago
Re: "convoluted"

I think the point being made is that array_udiff() can be used not only for comparisons between homogenous arrays, as in your example (and definitely the most common need), but it can be used to compare heterogeneous arrays, too.

Consider:

<?php
function compr_1($a, $b) {
$aVal = is_array($a) ? $a['last_name'] : $a;
$bVal = is_array($b) ? $b['last_name'] : $b;
return
strcasecmp($aVal, $bVal);
}

$aEmployees = array(
array(
'last_name' => 'Smith',
'first_name' => 'Joe',
'phone' => '555-1000'),
array(
'last_name' => 'Doe',
'first_name' => 'John',
'phone' => '555-2000'),
array(
'last_name' => 'Flagg',
'first_name' => 'Randall',
'phone' => '666-1000')
);

$aNames = array('Doe', 'Smith', 'Johnson');

$result = array_udiff($aEmployees, $aNames, "compr_1");

print_r($result);
?>

Allowing me to get the "employee" that's not in the name list:

Array ( [2] => Array ( [last_name] => Flagg [first_name] => Randall [phone] => 666-1000 ) )

Something interesting to note, is that the two arguments to the compare function don't correspond to array1 and array2. That's why there has to be logic in it to handle that either of the arguments might be pointing to the more complex employee array. (Found this out the hard way.)
up
17
adam dot jorgensen dot za at gmail dot com
15 years ago
It is not stated, by this function also diffs array1 to itself, removing any duplicate values...
up
15
b4301775 at klzlk dot com
12 years ago
Quick example for using array_udiff to do a multi-dimensional diff

Returns values of $arr1 that are not in $arr2

<?php
$arr1
= array( array('Bob', 42), array('Phil', 37), array('Frank', 39) );

$arr2 = array( array('Phil', 37), array('Mark', 45) );

$arr3 = array_udiff($arr1, $arr2, create_function(
'$a,$b',
'return strcmp( implode("", $a), implode("", $b) ); ')
);

print_r($arr3);
?>

Output:

Array
(
[0] => Array
(
[0] => Bob
[1] => 42
)

[2] => Array
(
[0] => Frank
[1] => 39
)

)
1

Hope this helps someone
up
3
Jorge Morales (morales2k)
5 years ago
I find it that this is an ideal place to apply the spaceship operator, but it was not used in the examples.

Here is Example#1 using the spaceship operator in the comparison function.

<?php
// Arrays to compare
$array1 = array(new stdclass, new stdclass,
new
stdclass, new stdclass,
);

$array2 = array(
new
stdclass, new stdclass,
);

// Set some properties for each object
$array1[0]->width = 11; $array1[0]->height = 3;
$array1[1]->width = 7; $array1[1]->height = 1;
$array1[2]->width = 2; $array1[2]->height = 9;
$array1[3]->width = 5; $array1[3]->height = 7;

$array2[0]->width = 7; $array2[0]->height = 5;
$array2[1]->width = 9; $array2[1]->height = 2;

function
compare_by_area($a, $b) {
$areaA = $a->width * $a->height;
$areaB = $b->width * $b->height;

return
$areaA <=> $areaB;
}

print_r(array_udiff($array1, $array2, 'compare_by_area'));
?>

The output is:
Array
(
[0] => stdClass Object
(
[width] => 11
[height] => 3
)

[1] => stdClass Object
(
[width] => 7
[height] => 1
)

)

I find it is pretty awesome you can substitute all of these lines:
if ($areaA < $areaB) {
return -1;
} elseif ($areaA > $areaB) {
return 1;
} else {
return 0;
}

with just:

return $areaA <=> $areaB;

Neat!
up
2
dmhouse at gmail dot com
19 years ago
Very easy way of achieving a case-insensitive version of array_diff (or indeed array_diff_assoc, array_intersect or any of these types of functions which have a similar function that takes a callback function as one of their parameters):

array_udiff($array1, $array2, 'strcasecmp');

This works because strcasecmp() compares two strings case-insensitively, as compared to the array_diff() which compares two strings by using the == operator, which is case-sensitive.
up
-2
jared
14 years ago
Note that php does the string conversion *before* sending the values to the callback function.
up
-3
aidan at php dot net
19 years ago
This functionality is now implemented in the PEAR package PHP_Compat.

More information about using this function without upgrading your version of PHP can be found on the below link:

http://pear.php.net/package/PHP_Compat
To Top