parse_ini_string
//pathinfo function example
<?php
//passing single argument
echo "<pre>";
print_r(pathinfo("/home/ramki/ramki.pdf"));
echo "</pre>";
//passing two agruments
$path=array(PATHINFO_DIRNAME,PATHINFO_BASENAME,PATHINFO_EXTENSION,PATHINFO_FILENAME);
foreach ($path as $value)
echo "<pre>".pathinfo("/home/ramki/ramki.pdf",$value)."</pre>";
?>
//output
/*
Array
(
[dirname] => /home/ramki
[basename] => ramki.pdf
[extension] => pdf
[filename] => ramki
)
/home/ramki
ramki.pdf
pdf
ramki
*/
pathinfo
(PHP 4 >= 4.0.3, PHP 5)
pathinfo — ファイルパスに関する情報を返す
説明
mixed pathinfo
( string
$path
[, int $options = PATHINFO_DIRNAME | PATHINFO_BASENAME | PATHINFO_EXTENSION | PATHINFO_FILENAME
] )
pathinfo() は、path
に関する情報を返します。options
によって連想配列あるいは文字列のどちらかとなります。
パラメータ
-
path -
調べたいパス。
-
options -
指定する場合は、どの要素を返すのかを
PATHINFO_DIRNAME、PATHINFO_BASENAME、PATHINFO_EXTENSIONあるいはPATHINFO_FILENAMEのいずれかで指定します。optionsを省略した場合はすべての要素を返します。
返り値
options パラメータを渡さなかった場合は、次の要素を含む連想配列を返します。
dirname、basename、
extension (存在すれば)、そして filename。
注意:
pathに複数の拡張子が含まれる場合は、PATHINFO_EXTENSIONは最後の拡張子だけを返します。また、PATHINFO_FILENAMEは最後の拡張子だけを取り除きます (最初のサンプルを参照ください)。
注意:
pathに拡張子がない場合は、 extension 要素は返されません (以下の二番目の例を参照ください)。
options を指定すると、
要求した要素を文字列で返します。
変更履歴
| バージョン | 説明 |
|---|---|
| 5.2.0 |
定数 PATHINFO_FILENAME が追加されました。
|
例
例1 pathinfo() の例
<?php
$path_parts = pathinfo('/www/htdocs/inc/lib.inc.php');
echo $path_parts['dirname'], "\n";
echo $path_parts['basename'], "\n";
echo $path_parts['extension'], "\n";
echo $path_parts['filename'], "\n"; // PHP 5.2.0 以降
?>
上の例の出力は以下となります。
/www/htdocs/inc lib.inc.php php lib.inc
例2 pathinfo() での、拡張子を空にしたときと拡張子がないときの違いの例
<?php
$path_parts = pathinfo('/path/emptyextension.');
var_dump($path_parts['extension']);
$path_parts = pathinfo('/path/noextension');
var_dump($path_parts['extension']);
?>
上の例の出力は、 たとえば以下のようになります。
string(0) "" Notice: Undefined index: extension in test.php on line 6 NULL
注意
注意:
カレントのパスに関する情報を取得するには、 定義済みの変数 のセクションをご覧ください。
注意:
pathinfo() はロケールを考慮して処理を行います。 マルチバイト文字を含むパスを正しく処理するには、正しいロケールを setlocale() 関数で設定しておかなければなりません。
参考
- dirname() - 親ディレクトリのパスを返す
- basename() - パスの最後にある名前の部分を返す
- parse_url() - URL を解釈し、その構成要素を返す
- realpath() - 絶対パス名を返す
add a note
User Contributed Notes
pathinfo - [33 notes]
krkbpk at gmail dot com RamaKrishna Kothamasu ¶
3 months ago
php [spat] hm2k.org ¶
4 years ago
A little compat for < 5.2
<?php
function pathinfo_filename($file) { //file.name.ext, returns file.name
if (defined('PATHINFO_FILENAME')) return pathinfo($file,PATHINFO_FILENAME);
if (strstr($file, '.')) return substr($file,0,strrpos($file,'.'));
}
?>
avi-team at inbox dot lv ¶
5 years ago
You shouldn't assign values as it is described in previous post
// wrong:
list( $dirname, $basename, $extension, $filename ) = array_values( pathinfo($file) );
if $file has no extension, you get wrong variable values: $extension would be assigned with 'filename' array element of pathinfo() result, but $filename - would be empty.
phpnet at whoisgregg dot com ¶
5 years ago
If you want to easily assign the values returned by pathinfo to separate variable names, list isn't enough. You can use array_values() first to convert the associative array into the indexed array that list() expects:
// throws notices, variables aren't set
list( $dirname, $basename, $extension, $filename ) = pathinfo($file);
// works
list( $dirname, $basename, $extension, $filename ) = array_values( pathinfo($file) );
cochise_chiracahua at hotmail.com ¶
7 years ago
Sometimes, it's interessant to get the basename without extension.
So, I appended a new entry 'basenameWE' (Basename Without Extension) to the returned array.
<?php
// pathinfo improved
function pathinfo_im($path) {
$tab = pathinfo($path);
$tab["basenameWE"] = substr($tab["basename"],0
,strlen($tab["basename"]) - (strlen($tab["extension"]) + 1) );
return $tab;
}
$my_path = "/var/www/html/example.html";
echo "<pre>\n";
print_r( pathinfo_im($my_path) );
echo "</pre>\n";
?>
Out :
Array
(
[dirname] => /var/www/html
[basename] => example.html
[extension] => html
[basenameWE] => example
)
n0dalus ¶
8 years ago
If a file has more than one 'file extension' (seperated by periods), the last one will be returned.
For example:
<?php
$pathinfo = pathinfo('/dir/test.tar.gz');
echo 'Extension: '.$pathinfo['extension'];
?>
will produce:
Extension: gz
and not tar.gz
Pietro Baricco ¶
1 year ago
Use this function in place of pathinfo to make it work with UTF-8 encoded file names too
<?php
function mb_pathinfo($filepath) {
preg_match('%^(.*?)[\\\\/]*(([^/\\\\]*?)(\.([^\.\\\\/]+?)|))[\\\\/\.]*$%im',$filepath,$m);
if($m[1]) $ret['dirname']=$m[1];
if($m[2]) $ret['basename']=$m[2];
if($m[5]) $ret['extension']=$m[5];
if($m[3]) $ret['filename']=$m[3];
return $ret;
}
?>
aalaap at gmail dot com ¶
4 years ago
Here is a simple function that gets the extension of a file. Simply using PATHINFO_EXTENSION will yield incorrect results if the path contains a query string with dots in the parameter names (for eg. &x.1=2&y.1=5), so this function eliminates the query string first and subsequently runs PATHINFO_EXTENSION on the clean path/url.
<?php
function extension($path) {
$qpos = strpos($path, "?");
if ($qpos!==false) $path = substr($path, 0, $qpos);
$extension = pathinfo($path, PATHINFO_EXTENSION);
return $extension;
}
?>
php-manual at spunts dot net ¶
4 years ago
For a good example of how platform independent this function is have a look at the different return values that Lostindream and I experienced. Mine is above and Lostindream's is below:
Array
(
[dirname] => /www/psychicblast/images/1
[basename] => my three girlfriends.jpg
[extension] => jpg
)
Array
(
[dirname] => /www/htdocs
[basename] => index.html
[extension] => html
[filename] => index
)
z
benjaminhill at gmail dot com ¶
4 years ago
A warning: this function varies depending on the platform it is being run on. For example, pathinfo('C:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe') will return a different result when run through a winOS PHP platform (local development) vs. a server's UNIX-based OS. A bit like the Locale settings, but unexpected.
tom at foo-bar dot co dot uk ¶
5 years ago
Note that this function seems to just perform string operations, and will work even on a non-existent path, e.g.
<?php
print_r(pathinfo('/no/where/file.txt'));
?>
which will output:
Array
(
[dirname] => /no/where
[basename] => file.txt
[extension] => txt
[filename] => file
)
admin at torntech dot com ¶
1 year ago
pathinfo will return null if 0 or null is specified for the option argument.
So you'll need to define it's value manually if the option field is omitted, to provide the default functionality.
<?php
public function getFileInfo($source = null, $option = null){
if(!$option){
//1 + 2 + 4
$option = PATHINFO_DIRNAME + PATHINFO_BASENAME + PATHINFO_EXTENSION;
if(defined('PATHINFO_FILENAME'))
$option += PATHINFO_FILENAME; //8
}
return pathinfo($source, $option);
}
$obj->getFileInfo("/test/file/someFile.txt");
?>
henrik at not-an-address dot com ¶
5 years ago
If you have filename with utf-8 characters, pathinfo will strip them away:
print_r(pathinfo("/mnt/files/飛兒樂團光茫.mp3"));
.. will display:
Array
(
[dirname] => /mnt/files
[basename] => .mp3
[extension] => mp3
[filename] =>
)
mrnemesis at ntlworld dot com ¶
5 years ago
Note that in PHP 4 (if you're stuck using it), pathinfo only provides dirname, basename, and extension, but not filename. This function will not split a file's stem and extension for you.
jjoss at mail dot ru ¶
4 years ago
pathinfo() which can be used with UTF filenames.
<?php
function pathinfo_utf($path)
{
if (strpos($path, '/') !== false) $basename = end(explode('/', $path));
elseif (strpos($path, '\\') !== false) $basename = end(explode('\\', $path));
else return false;
if (empty($basename)) return false;
$dirname = substr($path, 0, strlen($path) - strlen($basename) - 1);
if (strpos($basename, '.') !== false)
{
$extension = end(explode('.', $path));
$filename = substr($basename, 0, strlen($basename) - strlen($extension) - 1);
}
else
{
$extension = '';
$filename = $basename;
}
return array
(
'dirname' => $dirname,
'basename' => $basename,
'extension' => $extension,
'filename' => $filename
);
}
?>
Jordan Doyle ¶
20 days ago
It's worth nothing that pathinfo returns foo/index.php for the directory when dealing with URLs like foo/index.php/bar
Lostindream at atlas dot cz ¶
4 years ago
at example from "qutechie at gmail dot com" you can only replace function 'strpos' with 'strrpos'. (strrpos — Find position of last occurrence of a char in a string)
It's simple. For example:
<?php
function filePath($filePath)
{
$fileParts = pathinfo($filePath);
if(!isset($fileParts['filename']))
{$fileParts['filename'] = substr($fileParts['basename'], 0, strrpos($fileParts['basename'], '.'));}
return $fileParts;
}
$filePath = filePath('/www/htdocs/index.html');
print_r($filePath);
?>
Output will be:
Array
(
[dirname] => /www/htdocs
[basename] => index.html
[extension] => html
[filename] => index
)
leons87_AT_hotmail_DOT_com ¶
4 years ago
qutechie at gmail dot com wrote a fix for support for filename in PHP 4; however it gets it wrong whenever you have a filename with a . in it (so foo.bar.jpg would return foo instead of foo.bar).
A fix would be:
<?php
if(!isset($path_parts['filename'])){
$reversed_filename = strrev( $path_parts['basename'] );
$path_parts['filename'] = strrev( substr( $reversed_filename, strpos( $reversed_filename, '.' ) + 1 ) );
}
?>
The idea is that you reverse the string and create a substring that starts after the first '.' and then reverse the result.
qutechie at gmail dot com ¶
4 years ago
Quick fix for lack of support for 'filename' in php4
<?php
$path_parts = pathinfo('/www/htdocs/index.html');
echo $path_parts['dirname'], "\n";
echo $path_parts['basename'], "\n";
echo $path_parts['extension'], "\n";
echo $path_parts['filename'], "\n"; // since PHP 5.2.0
// if php4
if(!isset($path_parts['filename'])){
$path_parts['filename'] = substr($path_parts['basename'], 0,strpos($path_parts['basename'],'.'));
}
?>
christian dot reinecke at web dot de ¶
5 years ago
if you call pathinfo with a filename in url-style (example.php?with=parameter), make sure you remove the given parameters before, otherwise they will be returned as part of the extension.
extension => php?with=parameter
davidblinco at gmail dot com ¶
5 years ago
This function is not perfect, but you can use it to convert a relative path to a URL.
Please email me if you can make any improvements.
<?php
function mapURL($relPath) {
$filePathName = realpath($relPath);
$filePath = realpath(dirname($relPath));
$basePath = realpath($_SERVER['DOCUMENT_ROOT']);
// can not create URL for directory lower than DOCUMENT_ROOT
if (strlen($basePath) > strlen($filePath)) {
return '';
}
return 'http://' . $_SERVER['HTTP_HOST'] . substr($filePathName, strlen($basePath));
}
?>
Anonymous ¶
8 years ago
If you want only the file extension, use this:
<?php
$extension = substr(strrchr($filename, "."), 1);
?>
This is many times faster than using pathinfo() and getting the value from array.
rob at webdimension dot co dot uk ¶
8 years ago
Further to my previous post.
This affects servers that run PHP as a cgi module
If you have your own server:
You can use the AcceptPathInfo directive to force the core handler to accept requests with PATH_INFO and thereby restore the ability to use PATH_INFO in server-side includes.
Further information:
http://httpd.apache.org/docs-2.0/mod/core.html#acceptpathinfo
albertof at deltasoft dot com dot ar ¶
10 years ago
This code is to work in index.php/var/var
if(isset($PATH_INFO)) {
$viewcode = explode('/', $PATH_INFO);
$num = count($viewcode);
if($num % 2 == 0) {
$viewcode[] = '';
$num++;
}
for($i = 1; $i < $num; $i += 2) {
$$viewcode[$i] = $viewcode[$i+1];
}
}
m-symons at home dot com ¶
11 years ago
Here's a neat wee function to grab the relative path to root (especially useful if you're using mock-directories to pass variables into scripts with mod_rewrite). The function simply iterates through every occurence of "/" within the REQUEST_URI environment variable, appending "../" to the output for every instance:
<?php
function path_to_root($path) {
$pathinfo = pathinfo($path);
$deep = substr_count($pathinfo[dirname], "/");
$path_to_root = "./";
for($i = 1; $i <= $deep; $i++) {
$path_to_root .= "../";
}
return $path_to_root;
}
path_to_root($REQUEST_URI);
?>
mikep at oeone dot com ¶
11 years ago
If you run this on a directory, basename is the last directory in the path, dirname is the path before the final directory and extension is empty.
fabiolimasouto at gmail dot com ¶
2 years ago
Sometimes we want to get an array of each component in the pathname associated with the correspondent path to that directory. We need it for creating breadCrumbs and stuff like that. So here it goes:
<?php
/* Function parsePathComponents
* parse through all path components
* resolves the cross platform slash issue
* eliminates extra redundant slashes
* @return associative array: ComponentName=>CorrespondentPath
*/
/* Array */ function parsePathComponents($path,$endSlash=true,$base=false)
{
for(
$path = trim($path),
$slash = strstr(PHP_OS,'WIN') ? '\/' : '/',
$retArray = array(),
$str = $temp = "",
$x = 0;
$char = @$path{$x}; $x++)
{
if(!strstr($slash,$char)) $temp .= $char;
elseif($temp){
$str .= $temp;
$retArray[$temp] = $str.($endSlash ? $slash{0} : '');
$str .= $slash{0};
$temp = "";
}
}
$base&&$temp and $retArray[$temp] = $str.$temp;
return $retArray;
}
// Testing in WINDOWS
// NOTE: UNIX will return paths with normal slashes
// return array with path names ending with a slash
$path = '/my//stupid//path/to///some/file.php';
$pathComps = parsePathComponents($path);
print_r($pathComps);
//Array ( [my] => my\ [stupid] => my\stupid\ [path] => my\stupid\path\ [to] => my\stupid\path\to\ [some] => my\stupid\path\to\some\ )
$path = 'my/other//path/';
// return paths not ending with slash
print_r(parsePathComponents($path,false));
// Array ( [my] => my [other] => my\other [path] => my\other\path )
$path = 'my//other/path/to///file.php';
// use third argument = true: for capturing the "file.php" base
print_r(parsePathComponents($path,true,true));
//Array ( [my] => my\ [other] => my\other\ [path] => my\other\path\ [to] => my\other\path\to\ [file.php] => my\other\path\to\file.php )
?>
kc8yds at gmail dot com ¶
3 years ago
any type of url parse_url can handle this will get the extension of
pathinfo(parse_url('URL GOES HERE',PHP_URL_PATH),PATHINFO_EXTENSION)
OakBehringer ¶
5 years ago
Building on David Blinco's function, the following will:
1. Return the correct protocol for secure requests (https)
2. Throw an exception for invalid files
3. Ensure the returned url separates directories with forward slashes (David's will not on Windows systems).
function mapPath ($filepath) {
$realpath = realpath($filepath);
$dir;
// Verify that the path passed is real and harvest the bottom directory
if (is_file($realpath)) {
$dir = dirname($realpath);
}
elseif (is_dir($realpath)) {
$dir = $realpath;
}
else {
throw new Exception('File does not exist: ' . $realpath);
}
// Make sure the path is not lower than the server root
if (strlen($dir) < strlen($_SERVER['DOCUMENT_ROOT']))
throw new Exception("Cannot create http path below server http root.");
$path = ((isset($_SERVER['HTTPS']) && strtolower($_SERVER['HTTPS']) != 'off') ? 'https' : 'http') . '://' . $_SERVER['HTTP_HOST'] . substr($realpath, strlen($_SERVER['DOCUMENT_ROOT']));
if (DIRECTORY_SEPARATOR == '\\')
$path = str_replace('\\', '/', $path);
return $path;
}
anders.jenbo()pc.dk ¶
5 years ago
Heres a funciton to get the same results from php 4+ but you will have to call pathinfo_filename() instead of pathinfo().
<?php
if(version_compare(phpversion(), "5.2.0", "<")) {
function pathinfo_filename($path) {
$temp = pathinfo($path);
if($temp['extension'])
$temp['filename'] = substr($temp['basename'],0 ,strlen($temp['basename'])-strlen($temp['extension'])-1);
return $temp;
}
} else {
function pathinfo_filename($path) {
return pathinfo($path);
}
}
?>
sgermain at icexnetworks dot com ¶
7 years ago
It is true that if you put a directory into pathinfo, usually the extension is empty. But, if the directory name is /www/example.com/ for example, you will have the following output:
Array
(
[dirname] => /www
[basename] => example.com
[extension] => com
)
So, it is the same as a file.
junk at plaino dot com ¶
8 years ago
Convert a URL to the local file path and vice versa, convert a local file path to a URL.
// this sets the sytem / or \ :
strstr( PHP_OS, "WIN") ? $slash = "\\" : $slash = "/";
// This is the location of the php file that contains this
// function. Usually this request is made to files/folders
// down the directory structure, so the php file that
// contains these functions is a good "where am i"
// reference point:
$WIMPY_BASE['path']['physical'] = getcwd();
$WIMPY_BASE['path']['www'] = "http://".$_SERVER['HTTP_HOST'];
function url2filepath($theURL){
global $WIMPY_BASE, $slash;
$AtheFile = explode ("/", $theURL);
$theFileName = array_pop($AtheFile);
$AwimpyPathWWW = explode ("/", $WIMPY_BASE['path']['www']);
$AtheFilePath = array_values (array_diff ($AtheFile, $AwimpyPathWWW));
if($AtheFilePath){
$theFilePath = $slash.implode($slash, $AtheFilePath).$slash.$theFileName;
} else {
$theFilePath = implode($slash, $AtheFilePath).$slash.$theFileName;
}
return ($WIMPY_BASE['path']['physical'].$theFilePath);
}
function filepath2url ($theFilepath){
global $WIMPY_BASE, $slash;
$AtheFile = explode ($slash, $theFilepath);
$theFileName = array_pop($AtheFile);
$AwimpyPathFILE = explode ($slash, $WIMPY_BASE['path']['physical']);
$AtheFilePath = array_values (array_diff ($AtheFile, $AwimpyPathFILE));
$thFileURL = implode("/", $AtheFilePath)."/".$theFileName;
return ($WIMPY_BASE['path']['www']."$thFileURL");
}
m-symons at home dot com ¶
11 years ago
And, of course, to account for the problem noted in the first post whereby calling a directory, not a file, messes with the output of pathinfo(), you can include the following test:
if($pathinfo[extension] == "") {
$deep++;
}
Ooops...sorry for missing that.